Process Pumps – Mineralx Flowtech
Introduction to Process Pumps in India
Process Pumps in India are used in industrial operations that require the transfer of abrasive slurries, corrosive fluids and fluids containing high levels of solids. Mineralx Flowtech offers a range of process pumps designed for demanding applications across mining, mineral processing, construction and wastewater treatment.
The range includes multiple model sizes with different maximum flow rates and head capacities. In addition, the manufacturer describes configurations for horizontal surface installation, vertical suspension and fully submerged applications. Therefore, buyers can discuss their operating conditions and installation requirements with the supplier before selecting a suitable model.
Key Features of Mineralx Process Pumps
- Industrial fluid handling: Designed for applications involving abrasive slurries, corrosive fluids and high-solids content.
- Multiple model options: Eight models are listed, with different maximum flow and head capacities.
- Flexible installation configurations: The manufacturer describes horizontal, vertically suspended and fully submerged configurations.
- Wear resistance: Designed with an emphasis on resisting wear in demanding operating environments.
- Hydraulic performance: Model selection can be matched to required flow rate, head and system conditions.
- Maintenance considerations: The design focuses on ease of maintenance and operational reliability.
Actual performance depends on the selected configuration, fluid characteristics, operating conditions and system design.
Process Pump Models and Technical Specifications
The following specifications are listed on the manufacturer’s product page and supplied product screenshot.
| Model | Maximum flow rate | Maximum head |
|---|---|---|
| Model 32 / 50 | Up to 25 m³/h | Up to 95 m |
| Model 40 / 65 | Up to 35 m³/h | Up to 95 m |
| Model 50 / 65 | Up to 85 m³/h | Up to 95 m |
| Model 65 / 80 | Up to 150 m³/h | Up to 95 m |
| Model 80 / 100 | Up to 240 m³/h | Up to 100 m |
| Model 100 / 125 | Up to 370 m³/h | Up to 95 m |
| Model 125 / 150 | Up to 520 m³/h | Up to 65 m |
| Model 150 / 200 | Up to 550 m³/h | Up to 65 m |
Note: These are the maximum figures shown for the listed models. Maximum flow and maximum head may not be achievable simultaneously. Request the relevant pump performance curve and confirm the duty point with the manufacturer.
Applications of Process Pumps
Mineralx Process Pumps are presented for industrial applications such as:
- Mining and mineral processing operations
- Industrial fluid and slurry transfer
- Construction and related process applications
- Wastewater treatment
- Processes involving abrasive or corrosive fluids
- Systems handling fluids with a high solids content
Furthermore, the appropriate pump configuration depends on the fluid, installation arrangement and operating requirements. Buyers should provide accurate application details when requesting a quotation.
Benefits of Selecting the Right Process Pump
Suitable capacity selection: Comparing model flow and head ranges helps buyers identify options for further technical evaluation.
Application-based configuration: Discussing the installation layout and fluid properties helps establish whether a horizontal, vertical or submerged arrangement is appropriate.
Maintenance planning: Understanding wear conditions, operating hours and service requirements helps businesses plan inspections and replacement parts.
Operational efficiency: Selecting a pump that matches the actual duty point can help avoid unsuitable equipment selection and unnecessary operating difficulties.
Better procurement decisions: Comparing specifications before purchase helps engineering, maintenance and procurement teams discuss the requirements with the supplier more clearly.
These benefits depend on correct selection, installation, operation and maintenance; they are not guaranteed performance outcomes.
How to Choose a Process Pump
Before sending an enquiry, prepare the following information wherever available:
- Required flow rate in m³/h.
- Total system head in metres.
- Type of fluid and its chemical properties.
- Solids content, particle size and abrasiveness, where applicable.
- Required installation configuration.
- Operating hours and duty-cycle requirements.
- Site, piping and connection requirements.
Additionally, ask the supplier to confirm materials of construction, motor and drive details, available accessories, maintenance requirements, delivery schedule and warranty terms applicable to the selected model.
Supplier Information
Manufacturer: Mineralx Flowtech Pvt Ltd
Address: S.F. No. 435/1A, Palathurai Road, Mettangadu, Madukkarai, Coimbatore – 641105, Tamil Nadu, India.
Email: info@mineralx.in
Official website: https://www.mineralx.in/process-pumps
Explore More Industrial Products on TradersInd
Explore more industrial products and equipment on TradersInd to discover products from suppliers across different categories. Compare available product information and send enquiries to suppliers to discuss your business requirements.
Areas Served
Mineralx Flowtech is based in Coimbatore, Tamil Nadu, India. Buyers from other locations should contact the supplier to confirm delivery coverage, shipping arrangements, installation support and after-sales service availability for their project.
Send an Enquiry Through TradersInd
Looking for process pumps for an industrial application? Send an enquiry through TradersInd with your required flow rate, head, fluid details, installation configuration and preferred model.
The supplier can then review your stated requirements and confirm technical suitability, pricing, availability, delivery terms and other applicable conditions. Compare the proposed specifications before finalising your procurement decision.
Frequently Asked Questions
1. What are process pumps used for?
Process pumps transfer fluids in industrial systems. The Mineralx range is presented for applications involving abrasive slurries, corrosive fluids and high-solids content across several industrial sectors.
2. Which process pump models does Mineralx list?
The listed models are 32/50, 40/65, 50/65, 65/80, 80/100, 100/125, 125/150 and 150/200.
3. What is the maximum flow rate of these process pumps?
The highest maximum flow rate shown in the supplied specifications is up to 550 m³/h for Model 150/200. Actual flow depends on operating conditions and pump selection.
4. What is the maximum head available?
The highest maximum head shown is up to 100 m for Model 80/100. Buyers should confirm the actual head required and the performance curve for the selected duty point.
5. Can process pumps handle abrasive or corrosive fluids?
The manufacturer describes the range for abrasive slurries, corrosive fluids and fluids containing high solids. Confirm chemical compatibility, material selection and operating limits for your particular fluid.
6. Are different installation configurations available?
The manufacturer’s page describes horizontal surface-mounted, vertically suspended and fully submerged configurations. Confirm which configuration is available and appropriate for the selected model.
7. How do I select the correct process pump?
Provide the required flow rate, total head, fluid characteristics, solids content, installation configuration and operating conditions. Ask the manufacturer to verify the selection against the relevant performance curve.
8. How can I request a price for Mineralx Process Pumps?
Send an enquiry through TradersInd and include your application details, preferred model and required quantity. Confirm the quotation, delivery terms, warranty and other conditions directly with the supplier.
Product Information Disclaimer
The product descriptions and model specifications in this profile are based on information published by Mineralx Flowtech and the supplied product material. Maximum figures do not guarantee performance under every operating condition. Buyers should verify pump suitability, performance curves, material compatibility, technical specifications, pricing, availability and warranty terms with the manufacturer before purchase.
Reviews
There are no reviews yet.